How to Install IDE Hard Drive and Troubleshoot IDE Hard Drive Problems? This guide is for setting up an IDE drive. If you’re checking something an OEM machine you could be voiding your warranty so check first. When you try to install a really big hard drive into a lot of older systems, viewers the BIOS is only capable of viewing 137 GB. On even old mainboards you’ll find a 32 GB limit. To bypass this, you’ll want to use that install drive that came with the hard drive or if you are a comparatively advanced consumer a BIOS revise should be available.
The install disk comes on a floppy if you don’t possess one then you’d better have the ability to do a BIOS update. Usually do not drop or bump the drive. Keep the drive in the protective anti-static box until prepared to set up. Protect the drive from static release by wearing a grounded wrist strap.
Attach the wrist strap to the steel chassis of your personal computer. Handle the drive by the edges of the body. Do not apply pressure or attach labels to the circuit board or the very best cover of the drive. Turn off the power to the sponsor system before installation. Phillips screwdriver and four 6-32 UNC drive mounting screws.
Standard 40-pin ATA user-interface cable or an 80-conductor cable if running UATA66/100 (Max duration: 18 inches). An unused drive power wire for your new drive. Needle-nose pliers for eliminating or adding jumpers. … Read more